top of page

The IceSpa 7kW is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3.3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2.2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features Wi-Fi temperature control and a programmable timer using the dedicated Poolex App, available for iOS and Android smart devices. A colour touchscreen that can be detached from the unit (wired) can be added as an option.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Up to 7kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 4.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3.3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any type of spa, hot tub, swim spa or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 15 – 40°C, cooling range from 4 – 35°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOSand Android smartphones

Plug and play, comes with 4m mains cable and RCD plug (please note RCD plug will not fit outdoor sockets with covers)

32/38mm hose tail water connections, pipes and/or other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three year parts warranty, seven year parts (total) on compressor and 15 year corrosion (total) on Titanium coil

Poolex IceSpa 7kW Inverter Air Source Heat Pump

£1,499.00Price
  • Heating Capacity A26/W26

    3.3~7kW

    Power consumption

    0.28~1.4kW

    COP

    5~11.9

    Heating Capacity A15/W38

    2.8~4.7kW

    Power consumption

    0.67~1.3kW

    COP

    3.7~4.2

    Heating Capacity A-10/W38

    2.2~3.3kW

    Power consumption

    1.2~1.5kW

    COP

    1.8~2.1

    Maximum Power

    1.7kW

    Voltage

    230v

    Noise Level (10m)

    <28dB(A)

    Refrigerant

    R32

    Water Connections

    1″ male / 32-38mm

    Nominal Flow

    3m³/h

    Dimensions (L x W x H)

    710mm x 490mm x 500mm
bottom of page