The IceSpa is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.
EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.
Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.
Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.
The IceSpa features a remote colour touchscreen that can be detached from the unit (wired) and also Wi-Fi temperature control and a programmable timer using the Smart Life App, available for iOS and Android smart devices.
Key features
The power of Full Inverter & EVI efficiency right down to -25°C
Integrated remote colour touchscreen can be removed from the unit (wired)
Up to 5.38kW of heat output at air temperature of 26°C and water temperature of 26°C
Up to 3.7kW of heat output at air temperature of 15°C, water temperature of 38°C
Up to 3kW of heat output at air temperature of -10°C, water temperature of 38°C
Can be installed on any spa, hot tub, swim spa, or Nordic bath (size dependent)
Operates down to -25°C, automatic de-icing
Reversible hot/cold for ultimate flexibility, can be used to heat or cool
Heating range from 10 – 40°C, cooling range from 8 – 28°C
Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOSand Android smartphones
Plug and play – comes with mains cable and RCD
32/38mm hose tail water connections, pipes, and other fittings not supplied
Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)
R32 Refrigerant
Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover
Three-year parts warranty, seven-year parts (total) on compressor, and 15-year corrosion (total) on Titanium coil
Poolex IceSpa 5kW Inverter Heat Pump for Spas
Heating Capacity A26/W26
2.5~5.38kW Power Consumption
0.2~1kW COP
5.33~13.9 Heating Capacity A15/W38
1.8~3.7kW Power Consumption
0.3~1.2kW COP
3.01~5.6 Heating Capacity A-10/W38
3kW COP
1.6 Maximum Power
1.8kW Voltage
230v Noise Level (10m)
<32dB(A) Refrigerant
R32 Water Connections
1″ male / 32-38mm Nominal Flow
2.31 m³/h Dimensions (L x W x H)
600mm x 390mm x 423mm Weight
32Kg