9.5kw Inverter Air Source Heat Pump
The Inverboost PBS will work down to -15 degrees. With its Full DC Inverter, this heat pump offers stepped power resulting in improved efficiency to ON/OFF systems. With a draw between 0.14kw - 1.5kw and maximum output of 9.5kw, you will notice the saving on your heating costs.
This Air Source Heat Pump requires 500mm clearance on the rear and sides minimum, and 2000mm on the front (fan) side.
Comes with power lead, drain hose, manual and free delivery.
For supply only, you will need to source additional plumbing fittings to connect the unit to your hot tub, swim spa or pool, in addition to pipe laggin (insulation).
For standard installation, this includes plumbing the heat pump close to the hot tub, swim spa or pool, within the recommended parameters. Supply and fitting all plumbing, lagging (insulation) and labour included, within our service area only.
If you are located outside our service area, or require a more complicated installation due to locating the heat pump further away for example, then please contact us.
INVERBOOST PBS 9.5kW Heat Pump
Feature Info Heat Pump Size 9.5Kw Model Style Inverter Heat Pump Measurements (L/D/H) 855mm x 325mm x 565mm Capacity Kw 2.3kw - 9.5kw Power Draw 0.14kw - 1.5kw Power Supply 220v-240v 50HZ Single Phase
500cm (3-core included)
Air Temp Operating Range -15℃ to 41 ℃ Heating Range up to 40℃ Max Water Volume 25,000 Litres Sound (DB@1m) 40-50 Plumbing Fittings 1.5" Heat Exchanger Titanium Refridgerant R32 Flow Rate Required 2.5 mh3 Cooling Function Yes Input Line Control Yes Inline Pump Power Supply Yes Wifi Control Yes Unit Weight 68kg Capacity at 28°C 9.5kw
Capacity at 15°C 6.4kw
Capacity at 0°C 4.6kw
Capacity at -10°C 3.4kw
